Q Series (Three Speed)

Categories: ,

Q Series HEPA Fan Filter Units provide quiet performance and economy while delivering 90 FPM airflow velocities, perfect for most cleanroom applications. Base design includes a 99.99% efficient HEPA filter, a prefilter and a 3-speed switch with an off position which disables the unit while servicing.


Q Series HEPA fan filter units contain a 30% ASHRAE pleated type pre-filter on the top to stop large particles from coming into the cleanroom.

The 1/5 HP motor blower is a forward curved direct drive motor/blower assembly with isolation mounts. Units are available in 115 Volt (60 Hz) and 277 Volt (60 Hz).

Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% efficient and an ULPA grade 99.9995% efficient filter is available as an option.

The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.

Low Profile: All Q Series Models are12-5/8” high.

Standard Ceiling Size: All 2’ x 4’ models are designed to fit a nominal 2’ x 4’ ceiling grid with a 22.5” x 46.5” standard opening.

Air Flow: Airflow ranges from 500 to 750 CFM for a 2 x 4 unit and 250 to 400 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 632 on a 2 x 4 and 300 on a 2 x 2 unit respectively.

Sound Level: At average face velocity of 90 FPM measured 30″ from the face of the filter, sound level is approximately 50-52 dba with less than 45 dba ambient sound level. Field conditions, voltage, and method of testing could produce different results.


There are no reviews yet.

Be the first to review “Q Series (Three Speed)”

Your email address will not be published. Required fields are marked *

You may also like…