8100 Series Static Shielding Bags

Metal-In ESD Shielding Bags.
Amine and Amide Free.
RoHS and REACH Compliant.

For Sale with Real-Time Inventory on Elimstat.com, a Bennett & Bennett Company.

Categories: ,


Static Shielding Bags are constructed of plastic and aluminum in a pattern known as “metal-in”.

The “metal-in” layer is composed of ESD shielding aluminum laminate that provides a conductive Faraday Cage around electronics inside the bag. This is what stops electrostatic discharges (ESD) from entering it.

The anti static outer layers are made of static free polyethylene (PE) and polyester (PET). These prevent the bag from charging when it rubs against other surfaces.

All static shielding bags sold on Elimstat.com are lead-free, contain no amines, N-Octanoic acid, or heavy metals. This keeps them in compliance with RoHS and REACH.

They have no effect on aluminum, copper, silver, SN-Pb coated foil, stainless steel or low-carbon steel.

Electrical Properties Typical Values Test Method
Surface Resistivity < 1012 Ohms / Square ASTM D-257 @ 15% RH
ESD Resistance < 1011 Ohms / Square ANSI/ ESD STM 11.11
Static Shielding < 10 nJ EOS / ESD S11.31
Electrostatic Decay .01 Seconds FTMS 101 Method 4046
Capacitance Probe < 10 volts Difference MIL-PRF-81705D, EIA 541
Transparency 40% (Bar Code scans through bag) ASTM D 1003
MVTR (Moisture Vapor Transmission Rate) < 0.40 gas / 100 in2 @ 24 hrs / 100F FTMS 101C/2065
Corrosion | Outgassing Non-Corrosive | Pass MIL-STD-3010, M3005 | ASTM E595
Amines, N-Octanoic Acid, Heavy Metals Not Present / Recyclable RoHS, REACH

You may also like…

Leave a Reply

Your email address will not be published. Required fields are marked *

Bennett & Bennett Copyright 2018

Up ↑

Do NOT follow this link or you will be banned from the site!