Home > Static Control Products > Grounding | Wrist Straps > ESD Wrist Straps | 260 Series

ESD Wrist Straps | 260 Series:

Standard Grounding ESD Wrist Strap with Metal Backplate and Silver Suffused Nylon Threading to Ground Static


  • Clam Lock Closure adjusts the bracelet to multiple sizes
  • Wrist Strap Fabric Consists of Hypoallergenic Silver Plated Nylon Thread Into Polyester
Sold on our new site
Wrist Strap or Ground Cord:
Select Cord Size:
ESD Wrist Straps Specs Link

260 Series Wrist Strap Technical Data

Material Specifications. Thread with silver-suffused hypoallergenic nylon thread, our best-selling wrist strap draws charges from the wearer into a curved surgical stainless-steel backplate to ground the wearer.

Sizing and Use. The adjustable clam-lock fits any size wrist and allows 360° freedom of movement of the wrist while the wearer is grounded.

How a Wrist Strap Fits into an ESD Control Plan

Grounding. The coil cord contains a built-in 1 meg ohm resistor as required by ANSI / ESD S20.20 that plugs into the 4mm stud on the wrist strap with a 10mm hooded snap.

Bennett and Bennett manufactures ESD Jackets, Mats, Wrist Straps, and Common Point Grounds for Grounding Workers.

Once attached the coil cord and wrist strap can then be plugged into a common point ground or by using the optional alligator-clip you can clamp the coil cord to a path to Earth.

Part numbers: 260-006, 260-012, 000-006, 000-012

To purchase a product, call us at 888-4BENNETT (888-423-6638) or 937-324-1100 or email us at