Products and Services
HOMEESD & CLEANROOM PACKAGING

7200 Series Clean Nylon


Features
Bennett & Bennett Nylon cleanroom packaging film is the ideal answer for challenges involving toughness, cleanliness and maximum resistance to abrasion. Nylon used for cleanroom packaging is an unplasticized, FDA-approved, food-grade clear film. Nylon is a hydrophilic (water-sensitive) material; moisture acts as the plasticizer. The higher the moisture content of the film, the more flexible and rubbery it behaves. Nylon is very low in ionic contamination. Nylon offers the lowest levels of particulate count of any clean packing film.

As such, nylon is used in applications with a high sensitivity to contamination.

With its high abrasion resistance, Nylon is ideal for packing sharp or hard items that otherwise would cause a softer material to contaminate the product.

Standard items manufactured from Bennett & Bennett Nylon are clean to NASA JSCM 5322 (Level 50). Bennett & Bennett Nylon is available in widths from 2" to 60" with standard lengths of 500 and 1000 feet. Nylon bags are available in flat sizes from 2" x 1.5" to 36" x 80" (gusseted bags available by custom order only). Nylon sheets are available from 1" x 1.5" to 36" x 80". Nylon center-fold sheeting is available from 1.5" to 60" in standard 500' and 1000' lengths.

Does your specification require a nylon film with anti-static properties? Bennett & Bennett recommends Anti-Static Nylon.


Specifications
Physical Properties  
Material: Heat Stabilized Bennett & Bennett Nylon, a polyamide homopolymer.
Available As: Lay-Flat Tubing, Sheets, Centerfold Sheeting, Lay-Flat or Gussetted bags
Clarity: Transparent
Thickness: .002" (.004" available as special order).
Resistance Ratings Strong Acids D543 - Poor
Strong Alkalize D543 - Fair
Grease and Oil D722 - Good
Organic Solvents D543 - Good
Film Properties: ASTM Method Units Typical Value
Density D792 1.13 g / cm
Tensile Strength (break) D882 PSI MD 9000 TD 18000
Elongation (break) D882 % MD 250 TD 550
Water Vapor Transmission Rate: E96(B) 3.3 gm / 100 sq. in. /24hr
Oxygen Transmission Rate: D1434 500 cc / 100 sq. in. /24hr @ 75F

This document is prepared for our customers as a service, and is to the best of our knowledge true and accurate. However, it is understood and agreed by the users of this document that we will accept no liability for the conclusions reached. In addition, the products discussed are sold without warranty, expressed or implied, and this document is not to be construed as making any such warranties. Users of this document may therefore wish to perform additional testing before determining that products mentioned are suitable.