 |
Home 1.888.4BENNETT |
- ESD & Cleanroom Packaging
ESD Packaging 
7100 - Anti-Static Poly - 8000 - Conductive Poly
- 8100 - Static Shielded Bag (metal-in)
- 8300 - Static Shielded Bag (metal-out)
- Moisture Barrier
- BB-450
Moisture Barrier Bag
- 3000 Moisture Barrier Bag
- 3600 Moisture Barrier Bag
- Cleanroom Packaging
- 7200 Clean Nylon
- 7000 Clean Polyethylene
- Bennett Clean Films
- Back to Products Page
ESD & CLEANROOM PACKAGING 
3600 Moisture Barrier Bag
3600 Series Moisture Barrier bag is a reliable EMI/ESD shield. This bag meet the requirements of MIL-PRF-81705D, Type I, MIL-STD-1686, and EIS 583. The combination of a 0.0003 MVTR and puncture resistance of 45 pounds make this a great choice where the product being packaged is extremely sensitve to moisture damage.
3600 is available with a zip top closure option. We offer up to 4 PMS spot color printing on this bag.
3600 can be produced to meet "Clean To Level 100" rquirements. It is produced in the USA.
| SiZE | PART NUMBER |
|---|---|
| 3" x 5" Thru 18" x 24" ID | 3600XXXX |
| 3" x 5" Thru 18" x 24" Zip Top Closure | 3600XXXXZ |
| 3" x 5" Thru 18" x 24" ID "Clean To Level 100" | 3600XXXXC |
| Physical Properties | Method | Units | Typical Value |
|---|---|---|---|
| Thickness | ASTM D2103 | mils | .0061" +/-10% |
| Tear Strength | ASTM D1004-94, notched | lb | >45 |
| Burst Strength | FTMS 101-C Method2007-1a | psi | >97 |
| Puncture Strength | FTMS 101-C, Method2065.1 | lb | >20 |
| MVTR | FTMS 101C/2065 | gms/100 in²/24 hrs. 100° F | <0.0003 |
| OTR | ASTM D3985@100% Oxygen |
100 in (2) 2/24 hr, 77°F, 0%:90%R.H. | <0.006 |
| Outgassing | ASTM E595 | Pass | |
| Contact Corrosion | FTMS 101C, Method 3005 | No evidence of corrosion, Pitting, or etching of material | |
| Non-Corrosive | MIL-STD-3010, M3005 | Pass |
| Electrical Properties | |||
| Surface Resistance (both surfaces @ 12%RH |
EOS/ESD S11.11 | Ohms | <10E12 |
| Static Decay | MIL-PRF-81705D | Ohms | <10E12 |
| EMI Shielding (dB between 1 & 10 GHz) | EOS/ESD S11.31 | Seconds | <0.01 |
| Capacitive Probe Test | EIS Std 541/Appendix E, 1kV discharge | High Voltage Discharge, V | <10, 20MS |
| Charge Generation Teflon |
Modified incline plane | (nC/in2) | -0.03 |
| Quartz | Modified incline plane | (nC/in2) | +.10 |
| Chemical Properties | |||
| Polycarbonate Compatible | Contains no Amines, Amides or N-Octanoic Acid. | ||
| Corrosion | Nod effect on aluminum,copper, silver, Sn-Pb coated foil, stanless steel, Kovar, low carbon steel | ||
SHELF LIFE: MINIMUM 1 YEAR IN NORMAL INDOOR STORAGE CONDITIONS.
Our bags have an additional layer of barrier protection because of our packaging.
This document is prepared for our customers as a service, and is to the best of our knowledge true and accurate. However, it is understood and agreed by the users of this document that we will accept no liability for the conclusions reached. In addition, the products discussed are sold without warranty, expressed or implied, and this document is not to be construed as making any such warranties. Users of this document may therefore wish to perform additional testing before determining that products mentioned are suitable.