 |
Home 1.888.4BENNETT |
- ESD & Cleanroom Packaging
ESD Packaging 
7100 - Pink Anti-Static Ployethlene- 8000 - Conductive
- 8100 - Transparent, Multi Use Static Sheilded Bag (buried metal)
- Moisture Barrier
- BB-450 Transparent
Moisture Barrier - 3000 Moisture Barrier Bag
- Cleanroom Packaging
- Clean Nylon
- Bennett Clean Films
- Back to Products Page
ESD & CLEANROOM PACKAGING 
7100 Pink Anti-Static Polyethylene
Dissipative Bags - Reclosable
7100 Series Anti-Static Bags are permantly static dissipative. Standard bags are tinted pink to identify thier anti-static properties.
7100 Series Anti-Static Bags are amine and amid free, polycarbonate compatible and heat sealable.
| Description | Part Number |
|---|---|
| 3" x 5" x 4mil, Anti-Static Bag, Pink | 71000305 |
| 5" x 8 " x 4mil, Anti-Static Bag, Pink | 71000508 |
| 8" x 10 " x 4mil, Anti-Static Bag, Pink | 71000810 |
| 13" x 15" x 4mil, Anti-Static Bag, Pink | 71001315 |
| 18" x 24" x 4mil, Anti-Static Bag, Pink | 71001824 |
Custom sizes, mil thickness and colors are avaiable upon request.
| SPECIFICATIONS | ||
|---|---|---|
| 4 mil anti-static polyethylene film, 7100 meets the electrical requirements of MIL-PRF-81705D, Type II entitled Barrier Material. Flexible, Electrostatic-Free and Heat Sealable. Humidity independent and non-corrosive. When tested for Fluoride (F), Chloride (Cl), Sodium (Na), Sulfit (SO4), Nitrate (NO3), and Phosphate (PO4), these corrosive contaminants were found to be negligible or immeasurable. 7100 is made from a single layer of non-amine polyethylene. | ||
| Properties | Color - Clear, tinted pink, or tinted blue | |
| Thickness
- 4 mils ( also avaiable in 2 to 8 mils |
ASTM D 374 | |
| Tensile
Strength - 2000 to 3000 PSI |
ASTM D 882 | |
| Tearing
Strength - 65 to 450 lbs. per inch |
ASTM D 1004 | |
| Elongation
(MD%) - greater than 550 |
ASTM D 882 | |
| Dart
Impact - 250 - 700 gms |
ASTM D 1709 | |
| Burst
(Mullen) - 20 to 60 PSI |
ASTM D 774 | |
| Surface
Resistivity - <1011 OHMS/Sq. |
ASTM D 257 | |
| Performance | Static
Decay Rate - 5 KV-0 Volts < 2 seconds per MIL-PRF-81705D,
Type II - Fed. Test Method 101 Method 4046 Polycarbonate Compatibility - 3400 PSI at 73°F, 2500 PSI at 120°F, 1700 PSI at 158°F and 2000 at 185°F |
|
| Shelf Life | Permanently
anti-static under normal storage conditions. Tested: 16 hours @ 0°F - antistatic 16 hours @ 160°F - antistatic 8 hours @ 100°F - 95% RH-antistatic |
|
| Sizes | Bag
Width- 1 3/4" to 80" Bag length - any length available in reclosable tops Minimum 3" |
|
| Heat Sealing | Product
is suitable for automatic bag-making machines: Temperature - 250°F - 375°F Time - 0.5 - 3.5 seconds Pressure - 30 - 70 PSI |
|
| Applications | For packaging of static sensitive and non-static sensitive components, where electrostatic contamination is a problem. Products available - bags, tubing, sheeting. | |
| The values in this table were developed from random samples taken from production material we believe to be typical for the product. Actual values, however, may vary somewhat from those depicted here and we make no warranty, expressed or implied, as to the suitability of these materials for any specific use. Customers should determine product suitability based upon their own criteria. Nothing herin is to be taken as license to operate under or a recommendation to infringe upon any patent. | ||
This document is prepared for our customers as a service, and is to the best of our knowledge true and accurate. However, it is understood and agreed by the users of this document that we will accept no liability for the conclusions reached. In addition, the products discussed are sold without warranty, expressed or implied, and this document is not to be construed as making any such warranties. Users of this document may therefore wish to perform additional testing before determining that products mentioned are suitable.