 |
Home 1.888.4BENNETT |
- ESD & Cleanroom Packaging
ESD Packaging 
7100 - Anti-Static Poly - 8000 - Conductive Poly
- 8100 - Static Shielded Bag (metal-in)
- 8300 - Static Shielded Bag (metal-out)
- Moisture Barrier
- BB-450
Moisture Barrier Bag
- 3000 Moisture Barrier Bag
- 3600 Moisture Barrier Bag
- Cleanroom Packaging
- 7200 Clean Nylon
- 7000 Clean Polyethylene
- Bennett Clean Films
- Back to Products Page
ESD & CLEANROOM PACKAGING 
3000 Moisture Barrier Bag
3000 employs a static dissipative outer layer of static dissipative nylon, a solid aluminum foli middle layer, and an inner layer of static dissipative polyethylene to provide excellent moistured vapor protection.
The 3000 bag also provides full protection from ESD, static fields and tribocharging. It meets the requirements of IPC/JEDEC J-STD-033.
| SiZE | PART NUMBER |
|---|---|
| 10" x 20" | 30001020 |
| 10" x 30" | 30001030 |
| 16" x 18" | 30001618 |
| 4" x 4" (with zipper) | 30000404Z |
| 6" x 24" (with zipper) | 30000624Z |
| 8" x 10" (with zipper) | 30000810Z |
| 11" x 15" (with zipper) | 30001115Z |
| 15" x 18" (with zipper) | 30001518Z |
| Physical Properties | Method | Units | Typical Value |
|---|---|---|---|
| Thickness | ASTM D2103 | mils | 3.5 (92 microns) |
| Tensile Strength | ASTM D882-91 Method A | MD, psi | 9000 |
| Tensile Strength | ASTM D882-91 Method A | TD, psi | 10,500 |
| Tear Strength | ASTM D1004-94, notched | MD, lb | 4.7 |
| Tear Strength | ASTM D1004-94, notched | TD, lb | 4.3 |
| Elongation | ASTM D882-91 Method A | MD, % | 98 |
| Elongation | ASTM D882-91 Method A | TD, % | 80 |
| Burst Strength | FTMS 101-C Method2007-1a | psi | >84 |
| Puncture Strength | FTMS 101-C, Method2065.1 | lb | >20 |
Heat Seal Strength *Vetrod bar sealer |
ASTM D1876-93 | lb/in width | >11 |
| Heat Seal Temperature °F | °F | 325 (60PSI@3 sec dwell) | |
| Light Transmnission | ASTM D1033-92 | % | <0.01 |
| WVTR | ASTM F1249-90 | gms/100 in²/24 hrs. 100° F | <0.02 |
| O2TR | ASTM D3985@100% Oxygen |
100 in (2) 2/24 hr, 77°F, 0%:90%R.H. | <0.002 |
| Outgassing | ASTM E595 | Pass | |
| Contact Corrosion | FTMS 101C, Method 3005 | No evidence of corrosion, Pitting, or etching of material | |
| Non-Corrosive | MIL-STD-3010, M3005 | Pass |
| Electrical Properties | |||
| Surface Resistance (both surfaces @ 12%RH |
EOS/ESD S11.11 | Ohms/sq | <10E11 |
| Resistivity, Conductive metal layer | ASTM D257 | Ohms/sq | <10E12 |
| EMI Shielding (dB between 1 & 10 GHz) | EOS/ESD S11.31 | <40 | |
| Capacitive Probe Test | EIS Std 541/Appendix E, 1kV discharge | High Voltage Discharge, V | <20 |
| Charge Generation Teflon |
Modified incline plane | (nC/in2) | -0.09 |
| Quartz | Modified incline plane | (nC/in2) | +.10 |
| Chemical Properties | |||
| Polycarbonate Compatible | Contains no Amines, Amides or N-Octanoic Acid. | ||
SHELF LIFE: MINIMUM 1 YEAR IN NORMAL INDOOR STORAGE CONDITIONS.
Because we package all of our bags in an oversized shielding bag rather than in a Cardboard box, our bags are not exposed to moisture that will degrade the metallized shielding layer. Our bags have an additional layer of barrier protection because of our packaging.
This document is prepared for our customers as a service, and is to the best of our knowledge true and accurate. However, it is understood and agreed by the users of this document that we will accept no liability for the conclusions reached. In addition, the products discussed are sold without warranty, expressed or implied, and this document is not to be construed as making any such warranties. Users of this document may therefore wish to perform additional testing before determining that products mentioned are suitable.